Blinds are quite common in daily life, especially in many corporate offices。When the shutter is opened, it is like a piece of leaves is very beautiful, and the volume is very small and will not occupy too much space, so the shutter curtain is favored by consumers。But the problem comes again, some people feel that the price of asking others to install is too expensive or they do not have so much time at home or in the office to wait for him and they will not, then the next by Wuhansen Haisel blinds will ask you to open a knowledge door of blinds - how to install blinds。

　　1. Measurement of blinds

　　First of all, the size of the shutter must be measured to ensure the overall effect of the decoration design。Width: Measure the height, middle and low width of the inner wall of the window frame。Subtract 15 mm from the narrowest width and adjust to a multiple of 5 mm as the width of the curtain。 Height: Measure the height of the left and right sides of the inner wall of the window frame and the middle, and use the minimum height as the actual height of the curtain。However, in order to ensure the overall effect of the decoration design, it is best to ask professionals to measure custom shutters after all the floors and walls are painted, or to measure and reserve dimensions by professionals during construction。
 

　　2. Determine the outer frame and inner frame of the shutter

　　Use the same method to measure the size of the outer frame to determine that the window depth is sufficient for the blind blades to move freely, and different installation methods require different window depths。Fixed or flat installation needs 8cm depth, push and pull installation in addition to considering the width of the product blade but also consider the number of layers of the installed product, generally two layers of push and pull to ensure the blade activity needs 15cm depth, a single fan needs 10cm depth, folding installation needs to reserve 10cm depth。
 

　　Third, the shutter is installed on the wooden side

　　Louvers are installed on wooden squares;You can also choose the external mounting method, that is, make a wooden frame according to the widest and highest size of the outer frame of the hole, fix it on the outer wall of the hole, and fix the shutter on the wooden frame。If the window is cement, SLATE or other structure that is difficult to fix the blinds, it is necessary to do the lining and wall fixing, and then install the product on the lining wood。
 

　　The above is the knowledge explained by Wu Hansen Haisel shutters. I hope you will find it useful after seeing this article. You are welcome to reprint it to your friends around you and let them understand